Mustang 2044 Skid Steer Loader

$0.00

Mustang
Mustang built its first skid steer loader in 1965. Since then, Mustang has created a line of skid steers that are well-known for their strength and durability. And because you rely on your equipment to be ready when you are, these mighty workhorses come ready to tackle your biggest challenges.

Description

Mustang

Mustang built its first skid steer loader in 1965. Since then, Mustang has created a line of skid steers that are well-known for their strength and durability. And because you rely on your equipment to be ready when you are, these mighty workhorses come ready to tackle your biggest challenges.

Heavy-duty lift arms, a wide variety of attachments, powerful engines . . . These are just some of the items that come standard when you buy the Mustang 2044.  A few common features are:

Key Features

  • Load capacity of 1,450 lbs. and 1,550 lbs. with optional counterweight kit
  • Lift height of 112″
  • 47 hp Yanmar Tier III diesel engine
  • Radial-lift arm design
  • Fast ground speeds up to 6.6 mph
  • Operator-friendly Level I-certified ROPS/FOPS
  • Spacious operator compartment gives operator more comfort and excellent visibility
  • Auxiliary hydraulics of 18 gpm
  • Drive motors utilize SAHR (spring-applied hydraulic-release) brakes as standard equipment
  • Safety Interlock system requires operator to be seated with restraint bar down prior to operation
  • Tilt-up ROPS for easy internal service access

Steering/Hydraulic Control Options

  • T-Bar Hands Only Controls
  • Hand/Foot Controls
  • Dual-Hand Controls

Attachment Mounting System

  • The Multi-Tach™ mounting system offers compatible fit-up with most attachments
Dimensions
A. Overall Operating Height – Fully Raised (mm) 143.5″ (3645)
B. Height to Hinge Pin – Fully Raised (mm) 112″ (2845)
C. Overall Height to top of ROPS (mm) 77.7″ (1973)
D. Ground Clearance to Chassis (mm) 7.5″ (191)
E. Overall Length with Bucket (mm) 123.5″ (3137)
F. Overall Length without Bucket (mm) 95″ (2413)
G. Wheelbase (mm) 36.7″ (932)
H. Dump Reach at Full Height (mm) 25.7″ (654)
I. Rollback at Ground Level 28°
J. Dump Angle 32°
K. Overall Width (mm) 59″ (1499)
L. Bucket Width (mm) 61.5″ (1562)
M. Clearance Circle – Rear (mm) 50.5″ (1283)
N. Clearance Circle – Front w/o Bucket (mm) 39.3″ (997)
O. Clearance Circle – Front w/Bucket (mm) 73″ (1854)
P. Seat to Ground Height (mm) 34.6″ (879)
Q. Rollback at Full Height 100°
R. Dump Height (mm) 88.2″ (2242)
S. Departure Angle 24°
Standard Tire Size 10.00 x 16 HD
Engine
Make Yanmar
Model 4TNV-88 – Tier III
Net Power (kW) 47 hp (35)
RPM for Optimal Power 3000 rpm
Displacement (L) 133.6 cu.in. (2.19)
Hydraulics
Auxiliary Hydraulics – Standard (L/min) 18 gpm (68.1)
Filtration 7 micron
Reservoir Capacity (L) 11.5 gal. (43.5)
Electrical
Battery 12-volt (700 CCA)
Starter (kW) 12-volt (3.0)
Alternator 40-amp
Capacities/Weight
Rated Operating Capacity (kg) 1450 lbs. (658)
With optional counterweight (kg) 1550 lbs. (703)
Tipping Load (kg) 2900 lbs. (1315)
Fuel Tank (L) 14.3 gal. (54.1)
Travel Speed – Maximum (km/hr) 6.6 mph (11.3)
Operating Weight – Approximate (kg) 5623 lbs. (2551)
Show Buttons
Hide Buttons