Baystate Equipment - Rental & Sales

Nail Guns

Hitachi NV45AB Roofing Gun

Hitachi Power Tools

The Hitachi NV45AB's "magazine, depth of drive, and bullet proof design are excellent; you could probably drive an 18-wheeler over this tool and it would still work," Tools of the Trade Magazine, July/August 2005. The 1-3/4" Roofing Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB has a side load magazine.

5.5lbs, lightweight and well balanced for easy maneuverability
Side loading magazine, convenient and easy for quick replenishment
Tool-less depth of drive adjustment, for precision nailing/flush driving
Carbide tipped push lever, reduces wear
Rubber pads, help keep nailer from sliding off roof when not in use
Quick driving, for maximum efficiency
Pneumatic power feed and return, allows tool to operate in the harshest conditions
Long-lasting rubber grip, for added comfort
Available equipped with power pack- NV45ABH (5.7lbs)

www.hitachipowertools.com

Specifications

Fastener Diameter Range - 0.120

Magazine Capacity - 120

Magazine Loading - Side

Air Inlet - 3/8"

Operating Pressure - 70-120psi

Jam Clearing - Open-nose

Depth Setting - Tool-Less

Actuation - Contact, Sequential Optional

L x W x H - 9-27/32" x 4-5/8" x 10-3/8"

Tool Weight- 5.5 lbs

Fastener Type - Coil, Wire Collation

Magazine Angle - 16-Degrees

Fastener Length Capacity - 7/8" to 1-3/4"