Mini ExcavatorsYanmar ViO20-3 Mini Excavator
Yanmar ViO20-3 Mini Excavator, Yanmar America
Rent This Equipment

For Questions, Call 617-328-5095 

Yanmar America

The ViO development objective of turning within the crawler width has been successfully achieved with the ViO20-3, while maintaining the stability and work performance of a conventional style unit.  The final hurdle has been cleared - you'll love the tight turning Global ViO.


True Zero Tail Spin

• No part of the housing extends beyond the tracks.
• Allows efficient operation in tight spaces.
• Access to more jobs
• Less damage to the machine

• Less damage to the site
• Better visibility - Increased Safety


Hydraulic Quick Coupler

The standard equipment hydraulic coupler expands the versatility of the VIO series by allowing a variety of bucket sizes or attachments to be used, saving the contractor the expense of bringing other machines to the job site. The YANMAR hydraulic quick coupler adapts to most bucket pin sizes and spreads, allowing the VIO to adapt to other manufacturers products.

View Hydraulic Quick Coupler

ROPS/FOPS Canopy or Cabin

ROPS/FOPS Canopy protects against operator injury.


Spring Steel Cylinder Rod Guards

The cylinder rods on the VIO series boom, arm and bucket are protected by spring steel guards. The guards help prevent inadvertent damage to cylinders.


Joystick Controls

Joystick pilot controls with arm rests are convenient to use and reduce operator fatigue.


Integrated Boom Light

Integrated boom-light is protected from damage.


Angled Crawler Frame

Angled crawler frame reduces unwanted build up of foreign matter.


Traveling Alarm

The audible traveling alarm signals people nearby when the machine is being moved.


2 Way Control Pattern Change

Easy to access and use valve to change from Excavator to Backhoe control pattern in seconds.


Specifications


Model
ViO20-3
Operating Weight (Canopy)
4,910 lbs
Engine Make
YANMAR
Engine Model
3TNV76
Engine HP (net)
19.2hp/2400rpm
Engine HP (gross)
20.1hp/2400rpm
Digging Force (Bucket)
4,678 lbs
Digging Force (Arm)
3,057 lbs
Hydraulic Pump Type
3 x Piston 1 x Gear
Total Pump Capacity
20.2 gpm
Auxiliary Flow
11.3 gpm
Main Relief Set Pressure
2988 psi
Travel Speed (Low)
1.4 mph
Travel Speed (High)
2.7 mph
Traction Force/Draw Bar Pull
4,851 lbs
Fuel Tank Capacity
7.5 gal
Hydraulic Tank Capacity
7.9 gal
Ground Contact Pressure (Canopy)
4.0 psi
Lifting Capacity (Ground level at MAX)
1,180 lbs
Lifting Capacity (Ground level at 8'2"/2500mm)
1,808 lbs
Lifting Capacity (Ground level at 6'7"/2000mm)
2,488 lbs
Max. Digging Depth
8'0" (2440mm)
Max. Digging Depth w/ Blade
8'7" (2420mm)
Max. Vertical Digging Depth
6'3" (1900mm)
Max. Digging Height
13'1"(4000mm)
Max. Digging Reach@ground
13'8" (4160mm)
Max. Digging Reach
14'0" (4270mm)
Min. Turning Radius (w/o swing)
6'7" (2010mm)
Min. Turning Radius (w/ swing)
6'1" (1860mm)
Tail Swing Radius
2'3" (690mm)
Overall Length
12'10" (3915mm)
Overall Height/Canopy
4'6" (1380mm)
Overall Width
4'6" (1380mm)
Min. Ground Clearance
11" (280mm)
Track Length
6'2" (1890mm)
Sprocket Center to Idler Center
4'10" (1467mm)
Crawler Width
10" (250mm)
Blade Width
4'6" (1380mm)
Blade Height
11" (285mm)


For Questions, call 617.328.5095

© 2007 Baystate Equipment Rental and Sales Company, Inc., All Rights Reserved