Billy Goat Industries Inc.

The Billy Goat PR550 power rake weighs more than competitive units, maintaining better contact with the thatch layer with less of the surging and stalling commonly found in units weighing less.

Because the rotation is down sweep, the flails propel the PR forward, negating the additional weight.

Most power rakes vibrate excessively at the operator handle, but not the PR.

Because of the additional weight, and a 7gauge steel engine base, the PR absorbs most of the vibration before it is transferred to the handle

The PR design also has fewer parts than competitive units, making fewer adjustments necessary. Billy Goat was also first to use construction grade cast iron bearings. This makes lubrication and reel changeover a breeze.

Heat Treated Flails

Last considerably longer than competitor�s case hardened design.

Construction Grade Cast Iron Bearings

Complete with grease zerks for purging dirty grease.

Breakdown Handles

Padded, ergonomic handles are stiff under operation and fold for easy transport and storage.

Quick Changeover

Changing between flails and slicing reel is a ten-minute job.

www.rentalfirst.com

Specifications

Applications

Thatch Removal

Vertislicing (slicing reel required)

Overseeding

Model No.	PR550 - 5.5 HP Intek OHV PR550H - 5.5 HP Honda GX
Rake Width	20�
Rake Depth	0.5� to -1�
Weight	PR550 - 149 lbs. PR550H - 153 lbs.
Length	45.5�
Width	26.5�
Height	42.5�
Productivity	13,200 sq. ft. per hour @ 1.5 MPH