Baystate Equipment - Rental & Sales
Concrete Saws
CoreCut CC1800 Series Concrete Saw
Diamond Products
CoreCut 1800 Concrete Saw - Large Saw Features in a Portable Saw.
- Large saw features in a easily maneuverable saw
- Updated handle design with four rubber grips
- Screw feed raise and lower mechanism
- Available with push or hydrostatic transmission
- Maximum cutting depth 7-5/8" with 20" guard
- Handle adjusts to operators height
- Left or right side sawing
- Available with gas, electric or hydraulic power
- Your choice of 14" or 20" blade guard
Specifications
| Maximum Depth of Cut with 14" Blade | 4-5/8" |
| Maximum Depth of Cut with 20" Blade | 7-5/8" |
| Blade Shaft RPM | 2,600 |
| Blade Shaft Diameter | 1-1/4" |
| Arbor Diameter | 1" w/drive pin |
| Blade Shaft Drive |
3belt (13HP), 4 belt (16 HP & up) |
| Blade Mounting | right or left |
| Blade Raise and Lower | Screw feed |
| Front Wheel Dimensions | 5" x 2" x 1/2" |
| Rear Wheel Dimensions | 6" x 1-1/2" x 5/8" |
| Handle Bars | Adjustable Height and reversible |
| Transmission | Eaton Model 6 or push |
| Drive Speed | 0-80 feet per minute |
| Fuel Capacity | 2 gallons |
| Electric Start | 20 HP models only |
| Low Oil Alert | Standard |
| Tach/Hour Meter | Standard on 20 HP |
|
CC1800XL Dimensions |
| Saw Height with Handlebar | 42" |
| Minimum Length Pointer Up | 36" |
| Maximum Length Pointer Down | 72" |
| Saw Height w/o Handlebar | 36" |
| Frame Width | 16" |
| Frame Length | 30-5/8" |
| Saw Width | 22-3/8" |
| Front Axle Center Length | 10-5/8" |
| Rear Axle Center Length | 12" |
| Wheel Base Length | 15-7/8" |
| Blade Shaft Maximum Height | 13" |
© Copyright 2007, Baystate Equipment - Rental & Sales